Deionized Water Purifier WP-DU Series

Home » Avik Product Catalogue » Deionized Water Purifier WP-DU Series

Model : WP-D20U; WP-D30U; WP-D40U; WP-D50U; WP-D60U

Conductivity : 0.1us/cm (25℃)
PH Value (25℃) : None
Post purification Unit : Purification column
Standard Accessories : Host + accessory package
Shipping Size (WxDxH)(mm) : 533x435x550

Deionized water filter systems for your pre-treatment or deionisation applications.

You can later choose whether you want a quote, or if you place a firm order.

Product Description

Deionized Water Purifier Specifications:

Model		WP-D20U	WP-D30U	WP-D40U	WP-D50U	WP-D60U
Water Output Speed		20L/h	30L/h	40L/h	50L/h	60L/h
Water Supply Requirement		Tap water: TDS<200ppm; Water pressure>0.1Mpa;
Water Supply Requirement		Water temperature: 5-45℃
Pure Water Quality	Conductivity	0.1us/cm (25℃)
	PH Value (25℃)	None
	Oxidizable (Calculated as O)	Technical requirements: ≦0.08mg/L;
	Oxidizable (Calculated as O)	Test results: ≦0.08mg/L
	Evaporation Residue (105±2℃)	Technical requirements: ≦1.0mg/L;
	Evaporation Residue (105±2℃)	Inspection results: 0.7mg/L
	Inspection Basis	GB/T6682-2008
Consumption		25W
Control System		Operation mode display: power, water shortage, flushing, full water, inlet water quality monitoring, RO water quality and temperature UP water quality and temperature, etc.
Safety Performance		Automatically enters standby state when there is no water or low water pressure, and enters standby state when the system is full of water (constant pressure).
Purification System		Pretreatment unit, external softening filter (recommended in places with high raw water hardness); 1μm deep PP filter element*2+precision activated carbon filter element
RO Reverse Osmosis Unit		American original RO reverse osmosis membrane/membrane group
Post Purification Unit		Purification column
Standard Accessories		Host + accessory package + 3.2G pressure tank
Shipping Size (WxDxH)(mm)		533x435x550
N.W/G.W		23kg/25kg	28kg/30kg		33kg/35kg

Deionized Water Purifier Features:

The deionized water filter has power indicator, pump work indicator, low pressure indicator and system flushing indicator functions.
Using imported ion filtration membranes and high-pressure, silent pure water pumps, the operation quality is more reliable and it is applicable to a wider range of water quality;
It has system flushing function: every time before turning on the water machine, it will automatically flush for 30 seconds and then the system will start to make water;
The water deionizer filter has system protection function: when the water pressure is too low or there is no water, the equipment automatically shuts down, and when the water source comes in, the equipment automatically turns on;
WP-DU series deionized water filter has an online water quality monitoring function, which can monitor the incoming water quality (located above the instrument, near the function detection area, indicated by a digital tube), RO water quality and temperature, and pure water quality and temperature in real time.

Suggestion:

The quality of the incoming water affects the quality of the outgoing water and the service life of the filter column;
When the source water quality is poor (TDS is greater than 200ppm), the RO pure water quality will drop to above 10μs/c㎡;
When the raw water quality TDS>500, it is recommended to use a water softener;